We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for X-ray inspection equipment.
ipros is IPROS GMS IPROS One of the largest technical database sites in Japan that collects information on.

X-ray inspection equipment - List of Manufacturers, Suppliers, Companies and Products

X-ray inspection equipment Product List

1~15 item / All 20 items

Displayed results

Offline X-ray inspection device for small parts sampling and lot inspection.

All-in-one type with inspection room and control panel integrated.

This is an X-ray inspection device that allows for easy detection of defects such as batteries, aluminum products, plastic products, nests in printed circuit boards, voids, and foreign objects. It is an all-in-one type with the inspection room and control panel integrated, requiring minimal installation space.

  • Image Processing Equipment
  • Microscope

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

X-ray inspection device for secondary batteries 'X's-BT Series'

Products for testing and evaluating secondary batteries.

・Inline automatic inspection device ・Micro CT ・High-speed camera system capable of inspecting internal behavior

  • Image Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Microfocus X-ray fluoroscopy inspection device 'TXV-CH4090FD'

Ideal for solder inspection of the implementation board. Observation from an oblique direction is also possible.

<Specifications> - X-ray device: 90kV, focal point: 5μm - Table size: 400×350mm - Tilt angle: 0 to 60 degrees - Magnification: 10 to 160 times <Features> - Equipped with a maintenance-free sealed tube type micro-focus. - Features a flat panel sensor with high image representation capability, providing clear images without distortion. - Allows observation from an angled direction through tilted imaging. Additionally, it is equipped with a tracking function that ensures no observation points are missed during tilted imaging. - Includes BGA void measurement software. - Comfortable user interface that allows all operations on a PC screen. - Compact design that does not require a specific installation location.

  • 画像1.jpg
  • 画像2.jpg
  • X-ray inspection equipment
  • Image analysis software

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

X-ray inspection device for fine components

We introduce an X-ray fluoroscopy machine suitable for X-ray visual inspection and computer-aided inspection!

The "Micro Component X-ray Inspection System" is an X-ray inspection machine that displays X-ray fluoroscopic images on a computer screen, allowing for visual inspection and computer-aided inspection. It is suitable for applications such as X-ray visual inspection and computer-aided inspection. The inspection targets are various micro components. Additionally, the maximum tube voltage is 130kV, and the maximum tube current is 300μA, with a 4-inch image intensifier for the receiving part. 【Features】 ■ Displays X-ray fluoroscopic images on a computer screen ■ Capable of visual inspection and computer-aided inspection *For more details, please refer to the PDF document or feel free to contact us.

  • X-ray inspection equipment
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

X-ray fluoroscopy inspection device for experiments

Ideal for industrial use and research, development, and experiments! High-definition, high-quality X-ray imaging device.

The "XIE Experimental X-ray Fluoroscopy Inspection Device" is a high-definition, high-quality batch-type X-ray fluoroscopy device. It is suitable for various applications, including general industrial use, research, development, experimentation, and quality assurance. Additionally, the detection unit features a 6-inch or 9-inch image intensifier, with a geometric magnification range of 1.05 to 8 times. 【Features】 ■ X-ray fluoroscopy device ■ High-definition, high-quality type ■ Batch type *For more details, please refer to the PDF document or feel free to contact us.

  • X-ray inspection equipment
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

CIM Foreign Object Detection X-ray Fluoroscopy Inspection Device

Compact with upward illumination! X-ray fluoroscopy equipment suitable for foreign object inspection and quantity inspection.

The "CIM Foreign Object Detection X-ray Inspection System" is an inline-compatible X-ray inspection device driven by a conveyor. It features upward irradiation, is compact, and is not restricted by height. It is suitable for foreign object inspection, quantity inspection, and chip inspection. The detection unit uses a line sensor camera, with a detection width of 200mm or 450mm. 【Features】 ■ Inline compatible ■ Compact with upward irradiation ■ Not restricted by height ■ Conveyor driven *For more details, please refer to the PDF document or feel free to contact us.

  • X-ray inspection equipment
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Bottle and can X-ray inspection device

Inline compatible and conveyor-driven! X-ray inspection device capable of bottom surface inspection for bottles, cans, etc.

The "Bottle and Can X-ray Inspection System" is a product of Chubu Medical Co., Ltd., which specializes in X-ray technology. This product is compatible with inline systems and is conveyor-driven, allowing for bottom surface inspection of bottles and cans through diagonal dual-direction irradiation. It is particularly suitable for foreign object inspection, quantity inspection, and chip inspection. 【Features】 ■ Bottom surface inspection of bottles and cans through diagonal dual-direction irradiation ■ Inline compatibility ■ Conveyor-driven *For more details, please refer to the PDF document or feel free to contact us.

  • X-ray inspection equipment
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

X-ray fluoroscopy and CT scanner 'Cheetah EVO'

Inspection equipment effective for initial observation of various components and materials, including implementation substrates and electronic parts.

The "Cheetah EVO" is an X-ray inspection and CT scanning device equipped with a reflow simulator, allowing real-time observation of behaviors such as voids during soldering. It can be utilized for setting reflow conditions and selecting solder. Our company has examples of using this product for "observation of inductor coils," as well as "BGA solder crack analysis" and "observation of IC-type coils." 【Device Specifications (Excerpt)】 ■ X-ray Generator: Multi-focus transmission type ■ Tube Voltage: 25–160 kV ■ Tube Current: 0.01–1.0 mA ■ Tube Power: 64 W *For more details, please refer to the PDF materials or feel free to contact us.

  • image_02.jpg
  • image_03.jpg
  • image_10.jpg
  • image_11.jpg
  • image_02.jpg
  • image_04.jpg
  • image_03.jpg
  • X-ray inspection equipment
  • Other inspection equipment and devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

X-ray fluoroscopy and CT examination device: BGA solder crack analysis case study

X-ray fluoroscopy observation, oblique CT observation, orthogonal CT observation, etc.! Introduction of BGA solder crack analysis cases.

We will introduce a case study of BGA solder crack analysis using X-ray imaging and CT scanning. When observing the BGA connection area of a circuit board that had become electrically open using X-ray imaging, cracks were confirmed to have occurred at the BGA connection. Additionally, we examined the cracks in the solder connection area identified through X-ray imaging using oblique CT. Oblique CT provides clear planar information, but spherical shapes like solder balls and voids appear elongated in the vertical direction due to specific factors of oblique CT. While it is difficult to obtain cross-sectional information about the cracks occurring at the solder joint interface, there is the advantage of being able to observe the circuit board non-destructively. [Analysis Cases] ■ X-ray imaging observation ■ Oblique CT observation ■ Orthogonal CT observation ■ Cross-sectional observation *For more details, please refer to the PDF document or feel free to contact us.

  • 2.jpg
  • 3.jpg
  • 4.jpg
  • X-ray inspection equipment
  • Other inspection equipment and devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

X-ray fluoroscopy and CT examination device: Case study of wisdom tooth observation

[Video available] Introducing the X-ray CT image (orthogonal CT) of a wisdom tooth (third molar).

We would like to introduce a case of observing a wisdom tooth (third molar) using X-ray CT. Over 10 years ago, the extracted wisdom tooth of the photographer was observed using X-ray CT. Compared to X-ray fluoroscopy images, the enamel on the surface of the tooth and the underlying dentin were clearly observed. [Observation Case of Wisdom Tooth] ■Compared to X-ray fluoroscopy images, the enamel on the surface of the tooth and the underlying dentin can be clearly observed. *For more details, please refer to the PDF document or feel free to contact us.

  • 2.jpg
  • 3.jpg
  • X-ray inspection equipment
  • Other inspection equipment and devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Offline X-ray fluoroscopy device 'TXP-5150FD'

A versatile all-in-one model that achieves high image quality and ease of use.

The "TXP-5150FD" features a high-definition FPD with a wide dynamic range. It achieves high contrast and high image quality, making it suitable for a wide range of applications including aluminum die-cast parts, mechanical parts, electrical components, and resin molded products. We also offer customization options to meet our customers' needs. 【Features】 ■ X-ray Generator Equipped with a 150kV mini-focus X-ray generator ■ X-ray Detector Utilizes an FPD to achieve high contrast and high image quality ■ Large Sample Table Maximum diameter of 500 mm ■ Highly Flexible 5-Axis Stage The 5-axis stage (X, Y, Z, rotation, tilt) allows for inspection from multiple directions ■ Compact Design The device size has been reviewed and compacted from our previous models, allowing installation in narrow spaces ■ Highly Flexible 5-Axis Stage The 5-axis stage (X, Y, Z, rotation, tilt) allows for inspection from multiple directions ■ Options for inline inspection, automatic judgment, and upgrades to higher output types are available upon request *For more details, please feel free to contact us.

  • 画像1.png
  • 画像2.jpg
  • X-ray inspection equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

TLX Aluminum Die Casting X-ray Inspection Equipment

Ideal for X-ray visual inspection! It is possible to freely move the subject within the camera's field of view.

The "TLX Aluminum Die Casting X-ray Inspection System" is an X-ray inspection device equipped with a built-in transport system (X-Y table), allowing for the free movement of any subject within the camera's field of view. The inspection targets are typically die-cast products, making it suitable for X-ray visual inspection. The maximum tube voltage is 90kV, and the maximum tube current is 0.8mA, with a 4-inch image intensifier in the detection area. 【Features】 ■ Built-in transport system (X-Y table) ■ Ability to freely move any subject within the camera's field of view *For more details, please refer to the PDF document or feel free to contact us.

  • X-ray inspection equipment
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

XLE Experimental X-ray Fluoroscopy Inspection Device

Ideal for industrial use and research, development, and experimentation! Cost-effective X-ray fluoroscopy device.

The "XLE Experimental X-ray Fluoroscopy Inspection Device" is a cost-effective batch-type X-ray fluoroscopy device. It is suitable for various applications, including general industrial use, research, development, experiments, and quality assurance. Additionally, the detection part uses a luminescent sheet and a super-sensitive camera, with a geometric magnification rate of 1.05 to 8 times. 【Features】 ■ X-ray fluoroscopy device ■ Cost-effective type ■ Batch type *For more details, please refer to the PDF document or feel free to contact us.

  • X-ray inspection equipment
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Apparel product X-ray inspection device

X-ray foreign object inspection for bags, shoes, clothing, etc.! Conveyor-type X-ray inspection system.

The "Apparel Product X-ray Inspection Device" is a conveyor-type inspection device that inspects foreign objects within products using X-ray fluoroscopy images. Bags, shoes, and clothing are the target items, and visual inspection is possible. The maximum tube voltage is 60kV, with a maximum tube current of 2mA, and the detection part is a line sensor camera. 【Features】 ■ Inspects foreign objects within products using X-ray fluoroscopy images ■ Conveyor type ■ Visual inspection *For more details, please refer to the PDF document or feel free to contact us.

  • X-ray inspection equipment
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

X-ray fluoroscopy and CT examination device 'Observation case of inductive coil'

[Comparison images available] Internal shape abnormalities can also be observed non-destructively! We compared X-ray CT and cross-sectional SEM.

We will introduce a case of observing an inductor coil (orthogonal CT observation + cross-sectional observation). The inside of an inductor coil that experienced operational failure was observed using X-ray CT. It was confirmed that abnormal shapes occurred in various places of the spirally formed wiring. With X-ray CT observation, it is possible to observe in three dimensions, allowing for a clear understanding of the condition of the abnormal areas. Additionally, cross-sections including the abnormal areas were created through mechanical polishing, and observations were conducted using SEM. *For more details, please refer to the PDF document or feel free to contact us.

  • image_18.png
  • image_19.png
  • X-ray inspection equipment
  • Other inspection equipment and devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration